ABS Engineering Corporation (Pvt.) Limited

DIRECTORS

MR. MOHAMMAD AHMED - Managing Director

QUALIFICATIONS:

B. Tech. (Hons.) – Industrial Technology

B.Sc. - Industrial Technology

SPECIAL TRAINING:

Training for the installation, operation and maintenance of Sugar Plant, at BMR Germany.

EXPERIENCE:

40 years experience for the installation andoperation of following industries:-

SUGAR MILL, from Installation of 1500 TCD till the expansion of the same Mill up-to 8000 TCD.

Installation and expansion of ETHANOL PLANT and SLOP TREATMENT PLANT along with BIO GAS PLANT.

Installation of UREA FORMALDEHYDE PLANT.

Installation of TRACTOR ASSEMBLY PLANT.

Installation of CHIP BOARD PLANT.

SPECIAL EXPERTISE:

Establishment of new projects.

Selection of plants.

Negotiations for projects.

Selection of equipment

Management and co-ordination during the installation and commissioning of projects.

DIRECTORS

ENGR. FARHAN AHMED - Director

QUALIFICATIONS:

B. E. – Mechanical (NED University of Engg. & Tech.)

B.Sc. - Industrial Technology

EXPERIENCE:

15 years experience for fabrication and erection of equipment and machinery for various plants.

Successful completion of various partial and turn-key projects.

RESPONSIBILITIES:

To look after the following activities

Marketing and business development.

Reviewing and approval of bids prepared by the estimation department.

Discussion with Head of departments, in order to control the timely completion of jobs and projects.

Financial approvals of Project’s Procurements and Execution Budgets.

Approvals for the procurement of raw materials.

Periodic meetings with all internal departments to review the progress, quality and safety.

DIRECTORS

ENGR. ASAD AHMED – Director Operations

QUALIFICATIONS:

B.E. – Mechanical

EXPERIENCE:

5 Year experience for expediting the in-house fabrication and on-site construction activities.

RESPONSIBILITIES:

To look after the following activities

In-house manufacturing activities.

On-site projects activities.

Reviewing bids for approvals prepared by the estimation department.

Approvals for local and foreign purchases and their commercial negotiations.

DIRECTORS

MOHAMMAD ALI – Director Technical

QUALIFICATIONS:

M.O.T. 1st (CHIEF ENGINEER)

SPECIAL COURSE & TRAINING:

Manufacturing, Construction, Maintenance and Repair of S.E.M.T. Pile stick, Diesel Engine at I.H.I. Ship Yard (I.O.E.), Japan.

Pneumatic Remote Control Equipment Training at NABCO (Marine Product Division), Kobe, Japan.

EXPERIENCE:

30 Years experience of Ship repairs & maintenance, Plant maintenance and Project management.

RESPONSIBILITIES:

To look after the following activities:-

Technical scope for the execution of manufacturing & erection activities for running projects.

To make or modify the technical policies to fulfill the technical requirements of the project.

To have technical discussion with designers and clients.

DIRECTORS

MOHAMMAD KALIM – Director Technical

QUALIFICATIONS:

B. Tech. (Hons.) – Industrial Technology

B.Sc. - Industrial Technology

SPECIAL COURSE & TRAINING:

“ENGINEERING TRAINING COURSE” Conducted by FORD FOUNDATION USA at IRRI Manila, Philippines.

“PRODUCTION THROUGH WORK STUDY” Conducted by Asian Productivity Consultant, Philippines.

“MECHANICAL MAINTENANCE FOR ENGINEERS” by “ENAR” Petrotech Services Limited.

“DYNAMIC BALANCING AND VIBRATION ANALYSIS” Training from M/s. Carl Schenck, Germany.

EXPERIENCE:

28 years experience in the field of fabrication, installation and maintenance of process and manufacturing plants.

Vibration analysis and removal.

RESPONSIBILITIES:

Top management of “ROTARY MACHINES DIVISION” of the company. Including manufacturing’s Planning & Control.

Arrangements for the designing of the machines.

To look after the development and modification of Rotary machines, according to client’s requirement.

MANAGERS

ALI AKBER ANSARI – Manager Production

QUALIFICATIONS:

D.A.E. - Mechanical

EXPERIENCE:

30 years experience in the field of manufacturing and installation of machinery and equipment for Petrochemical, Sugar, Cement, Chemical process and other manufacturing industries.

RESPONSIBILITIES:

To look after the following activities:

Management of manufacturing activities of both Workshops.

Co-ordination between Engineering, Production and Procurement departments.

	Distribution of jobs.
	Production management and planning.

MANAGERS

ENGR. M. JALIL KHAN – Manager Projects

QUALIFICATIONS:

B.E. (Mechanical)

EXPERIENCE:

14 years experience of Project Management

RESPONSIBILITIES:

To look after the following activities:

Top Management of on-going projects.

Allocation of jobs to Project Engineer.

Projects Budgets Preparation and allocation.

Hiring of Human and other resources.

Periodic Internal Technical Audits of technical departments.

To monitor the implementation of QC system and procedures, for the achievement of U-stamp and ISO 9002 certification.

MANAGERS

SHEIKH HABIB UR REHMAN – Manager Quality Control

QUALIFICATIONS:

S.S.C. PRE-ENGINEERING

EXPERIENCE:

45 Years extensive experience in the field of Quality Control / Quality Assurance in the following area of construction and fabrication:-

Material selection, Testing & Inspection including welding consumables

Development and implementation of QC plans and Stage Inspections for the fabrication of different equipment such as, Pressure vessels, Boilers, Heat exchangers, Air cooled heat exchangers, Storage tanks, Kiln shells, Column, Reactors, High / Low Pressures Steam drums for power plants, Condenser De-aerators, Feed water vessels, Power plants, Pressure piping, Process piping, Steel structure and PWHT activities for Oil & Gas, Power, Petrochemical, Fertilizer and other Petrochemical Industries.

RESPONSIBILITIES:

To manage the stage Inspection activitiesaccording to code and standards.

To develop and implement the QA/QC manuals and Inspection & Tests Plans (ITPs), in accordance with orders requirements, Codes and Standards.

Control of welding activities.

PWHT activities.

Coordination and Implementation of NDT activities, UT, RT, MPT & DPT).

Coordination with Third Party Inspectors and Client’s Inspectors.

ENGINEERS

SYED WALI HAIDER – In-charge Engineer (Fabrication Shop)

QUALIFICATIONS:

D.A.E. (Mechanical)

EXPERIENCE:

23 years experience in the field of fabrication & erection of rotary machines and process equipment such as: Pressure vessels, Heat exchangers, Reactors, Columns, Evaporators, Vacuum pans, Pressure filters, Vacuum filters, Dryers, Centrifugal machines, Crushers, Graders, Conveyors, Storage tanks, Pipe line and various steel structures.

RESPONSIBILITIES:

To look after the following activities:

To manage the execution of fabrication activities in fabrication shops.

To develop and implement fabrication & erection techniques.

To allocate fabrication jobs to the supervisors of both workshops.

Preparation of fabrication and erection methodologies.

To review the shop drawings and cutting plans, issued by drawing office and issue for execution.

ENGINEERS

MOHAMMAD KHAN AZHAR – In-charge Engineer (Machine Shop)

QUALIFICATIONS:

D.A.E. (Mechanical)

SPECIAL COURSE & TRAINING:

Certificate course from G.C.T., Karachi.

Training course from Pak-Swiss Training

	Center for:
	All kinds of gear cutting and Hobbing.

Heat treatment procedures for Hardening, Tempering, Annealing, Normalizing and Carburizing.

EXPERIENCE:

27 years experience in the field of heavy and precise machining, development of machining techniques, Tigs & Fixtures, Gear cutting, machines assembly, installation and commissioning of Rotary machines.

RESPONSIBILITIES:

To look after the following activities in Machine shop:

To organize machining activities in machine shop.

Time study for machining activities.

Development of machining techniques and attachments.

Final assembly of machines and equipment.

Commissioning and start up of machinery at client’s location.

Dynamic balancing of rotary parts such as; Turbine rotors, Generator rotors, Motors, Rotors etc

Repair and maintenance of in-house machines.

Development of Dies designs for press works.

To carryout the repair, maintenance and refurbishment of machinery projects.

ENGINEERS

MOHAMMD TEHSIN – Manger Procurement

QUALIFICATIONS:

D.A.E. (Mechanical)

EXPERIENCE:

15 years experience for the erection of Equipment, Machinery, Tank Farms and Complete plants.

14 years experience for the local and foreign procurment of raw materials, equipment, plant and machinery.

RESPONSIBILITIES:

To manage the following activities of site projects:

Searching, prequalification and registering of local and foreign suppliers and vendors.

Purchasing and issuance of purchasing inquiry.

Expediting for quotations.

Technical evaluation in accordance with requisition, of quotations.

Preparation of comparative statements.

Negotiations with local and foreign suppliers.

Issuance of Purchase orders or establishment of L/Cs.

Expediting for the timely supply of ordered materials.

ENGINEERS

NOSHAD AKHTAR – In-charge Engineer (Field Services)

QUALIFICATIONS:

D.A.E. (Mechanical)

Graduation

EXPERIENCE:

10 Years experience in the field of fabrication, erection, testing and commissioning of plants, machinery and equipment. Field services including Plant piping, Storage Tanks, Steel structure and
Shop fabricated equipment such as Pressure vessels, Heat exchangers, Columns and Rotary machines.

RESPONSIBILITIES:

To manage the following activities of on-site projects (Field Services):

Project In-charge for the on-site projects of Field Services Division.

To manage the execution of Fabrication, Erection, Testing and commissioning activities of on-site projects.

To attend client’s periodic progress review meetings, to discuss the material, technical, quality and progress matters of projects.

To prepare and allocate the on-site project’s budgets.

To monitor the projects schedule to complete within due date.

INSPECTORS – QC DEPARTMENT

HASAN ALI – Quality Control Inspector

QUALIFICATIONS:

D.A.E. (MECH.)

EXPERIENCE:

26 year’s experience in Fabrication & Inspection of Steel structure, Stainless steel Pressure vessel, Heat exchanger, Columns, Air cooler Heat Exchangers, Condensers and Steel Structure for Oil & Gas and Steel Mills.

RESPONSIBILITIES:

To carryout the inspection of fabrication activities.

To maintain records and documentations according to ITPs.

To compile documents for M.D.R.

DRAWING OFFICE SUPERVISORS

MR. WARIS ALI SHAH - Drawing Office In-charge

EXPERIENCE:

26 Years experience in the field of fabrica-tion and erection of steel structure, rotary machines and Process equipment, such as: Pressure vessels, Heat exchangers, Reactors, Columns, vaporators, Vacuum pans, Pressure filters, Vacuum filters, Storage tanks, Pipe line, Boiler and Water treatment plant maintenance work.

RESPONSIBILITIES:

Review of fabrication drawings.

Shop detailing and preparation of cutting plans.

Preparation of BOQ for material procurement.

To supervise the AutoCAD Draughts-men for the preparation of shop fabrication drawings.

MR. SAJID HUSSAIN – Supervisor AutoCad

QUALIFICATION:

D.A.E. - Mechanical.

Two years course in mechanical drawings.

AutoCAD course 2D and 3D.

EXPERIENCE:

8 Years experience as a Mechanical drawings drafting on AutoCAD.

RESPONSIBILITIES:

To supervise the AutoCAD operators for:

The development of shop fabrication drawing and cutting plans.

Drawings preparation.

Layout drawings preparation.

Maintenance of drawings record and document control.

FABRICATION SHOP SUPERVISORS

VALIANT ZAFAR HAMID – Fabrication Supervisor

EXPERIENCE:

30 years in the field of fabrication & erection of Piping, Steel Structure, Rotary equipment, Conveyors , Pressure vessels, Columns, Gas reformer, Oil Furnace, Steam turbine, Soda ash plant’s equipment, Distillery equipment, Heat exchangers, Storage tanks, Desalination and Demoralizing water plant, Kiln, Cyclones for pre-heater.

RESPONSIBILITIES:

To manage execution of fabrication activities in workshops.

Material control, Implementation of new techniques to improve quality.

Coordination with Q.C. department for stage inspections.

Fabrication planning and scheduling, in accordance with schedule of workshop fabrication activities.

MUHAMMAD TUFAIL – Fabrication Supervisor (on-site Projects)

EXPERIENCE:

12 Years experience in the fabrication and erection of Steel structures, storage tanks, Vessels, Columns, Heat exchanger, Conveyor and Plant Pipe.

RESPONSIBILITIES:

To manage execution of on-site fabrication and erection activities..

Material control, Implementation of new techniques to improve quality.

Coordination with Q.C. department for stage inspections.

Fabrication planning and scheduling, in accordance with schedule of on-site projects.

FABRICATION SHOP SUPERVISORS

MOHAMMAD SAGHEER - Fabrication Supervisor (Workshop No. 2)

EXPERIENCE:

20 years experience for the erection of Thermal Power Plants, Repair of Barrage’s gates, Shut-down maintenance of Fertilizer Plants and Refineries.

RESPONSIBILITIES:

To look after the following activities at Workshop No. 2:

To manage execution of fabrication activities in workshops.

Material control, Implementation of new techniques to improve quality.

Coordination with Q.C. department for stage inspections.

Fabrication planning and scheduling, in accordance with schedule of workshop fabrication activities

ENGINEERS

FAIZAN SHABBIR – Project Engineer

QUALIFICATIONS:

B.E. (Industrial Manufacturing)

EXPERIENCE:

Final Year Engineering Project:

Supply Chain Management of Crescent Steel & Allied Products Ltd.

RESPONSIBILITIES:

To look after the following activities:

Department wise division of responsibilities.

Manpower, calculation of man hours required according to various traits.

Material procurement and insuring on time delivery.

Receiving and updating daily and weekly progress and activity report from site and workshop.

Fortnight presentation to the management on project updates indicating following:

Up to date progress.

Comparative between planned and actual progress.

Cause of lack in progress, if any.

Formulate a plan, based on resource management skills, to bring project progress up to par to the planned progress.

ENGINEERS

SHAMSUDDIN – Planning Engineer

QUALIFICATIONS:

B.E. (Mechanical), NED University

EXPERIENCE:

03 Years experience in the field of fabrication, erection, testing and commissioning of plants, machinery and equipment. Field services including Plant piping, Storage Tanks, Steel structure and Shop fabricated equipment such as Pressure vessels, Heat exchangers, Columns and Rotary machines.

RESPONSIBILITIES:

To look after the following activities:

Calculate the Time for completion of project.

Calculate Man-hours which will be depute on the side.

Coordination with client regarding Material Delay & other reasons.

For represent the bars for showing progress use Microsoft Project.

Dealing with client representative regarding planning matters.

ENGINEERS

AMEER KHAN– Project Engineer

QUALIFICATIONS:

B.E. (Industrial Manufacturing)

EXPERIENCE:

Final Year Engineering Project:

Progresive Die for Front Seat Bracket for Honda Civic 2006.

RESPONSIBILITIES:

To look after the following activities:

Fabrication & Erection Planning

Manpower, calculation of man hours required according to various traits.

Monitoring Progress

Receiving and updating daily and weekly progress and activity report from site and workshop.

Fortnight presentation to the management on project updates indicating following:

Assisting site staff with the programming and resourcing of work

ENGINEERS

MOHAMMAD ASIF – Project Engineer

QUALIFICATIONS:

B.E. (Industrial Manufacturing)

EXPERIENCE:

Final Year Engineering Project:

Supply Chain Management of Crescent Steel & Allied Products Ltd.

RESPONSIBILITIES:

To look after the following activities:

Department wise division of responsibilities.

Manpower, calculation of man hours required according to various traits.

Material procurement and insuring on time delivery.

Receiving and updating daily and weekly progress and activity report from site and workshop.

Fortnight presentation to the management on project updates indicating following:

Up to date progress.

Comparative between planned and actual progress.

Cause of lack in progress, if any.

Formulate a plan, based on resource management skills, to bring project progress up to par to the planned progress.

ENGINEERS

SHAKEEL MANERI – Project Manager

QUALIFICATIONS:

B.E. (Mechanical) from NED University

EXPERIENCE:

Final Year Engineering Project:

28 years experience of Project Management.

RESPONSIBILITIES:

To look after the following activities:

Complete project planning.

Allocation of jobs to Project Engineer.

Projects Budgets Preparation and allocation.

Hiring of Human and other resources.

Preparation of contract documents

ENGINEERS

Asif Raza – Manager project Planning

QUALIFICATIONS:

Master of Science

EXPERIENCE:

Final Year Engineering Project:

09 years experience of Project Management.

RESPONSIBILITIES:

To look after the following activities:

Top Management of on-going projects.

Allocation of jobs to Project Engineer.

Projects Budgets Preparation and allocation.

Hiring of Human and other resources.

Periodic Internal Technical Audits of technical departments.

To monitor the implementation of QC system and procedures, for the achievement of U-stamp and ISO 9002 certification.

ENGINEERS

AZAM SHEIKH – Manager Coordination

QUALIFICATIONS:

B.E. (Mechanical)

EXPERIENCE:

Final Year Engineering Project:

14 years experience of Project Management

RESPONSIBILITIES:

To look after the following activities:

Top Management of on-going projects.

Allocation of jobs to Project Engineer.

Projects Budgets Preparation and allocation.

Hiring of Human and other resources.

Periodic Internal Technical Audits of technical departments.

To monitor the implementation of QC system and procedures, for the achievement of U-stamp and ISO 9002 certification.

OFFICERS – H.S.E. DEPARTMENT

SHAMSHAD KARIM – Safety Officer

QUALIFICATIONS:

Intermediate

EXPERIENCE:

Final Year Engineering Project:

35 Years experience in the field of Health, Safety & Environment Department.

SPECIAL TRAINING:

Management Development Program.

Gas Turbines Training Classes.

RESPONSIBILITIES:

To look after the following activities:

Giving trainings to employees on Health, Safety & Environment.

Conducting Community Awareness Programs around the localities of work areas.

Communicating HSE issues with clients.

INSPECTORS – QC DEPARTMENT

NAZEER AHMED – Welding Inspector

EXPERIENCE:

20 year’s experience as Welding inspector at various projects related to; Pressure equipment, high pressure piping, crosscountry piping, Storage Tanks and steel structure.

RESPONSIBILITIES:

To carryout welding visual inspection.

To monitor and control the welders quality.

To ensure the use of welding consumable is according to requirement.

To perform different non destructive test, Vacuum test and welding techniques.

Welder’s qualification test and keeping he record of qualified welders.

Coordination with NDT Personnel.

INSPECTORS – QC DEPARTMENT

MUHAMMAD TUFAIL – Fabrication Supervisor (on-site Projects)

EXPERIENCE:

12 Years experience in the fabrication and erection of Steel structures, storage tanks, Vessels, Columns, Heat exchanger, Conveyor and Plant Pipe.

RESPONSIBILITIES:

To manage execution of on-site fabrication and erection activities.

Material control, Implementation of new techniques to improve quality.

Coordination with Q.C. department for stage inspections.

Fabrication planning and scheduling, in accordance with schedule of on-site projects.

FABRICATION SHOP SUPERVISORS

MOHAMMED LATIF ASAD – Machine Shop Supervisor

EXPERIENCE:

27 years experience in the field of light and heavy machining of parts and components, required for the fabrication and assembly of machinery and equipment.

RESPONSIBILITIES:

To look after the following activities:-

Execution of machining activities, according to cutting plans and drawings.

Implementation of machining techniques developed by machine shop in-charge.

To manage the machine shop activities of marking, cutting, forming / bending, machining and fit-up assemblies of machinery and equipment.